Notices

All capitalized terms in the following text have the meanings assigned to them in the OASIS Intellectual Property Rights Policy (the "OASIS IPR Policy"). The full Policy may be found at the OASIS website.

This specification is published under the Attribution 4.0 International (CC BY 4.0). Portions of this specification are also provided under the Apache License 2.0.

All contributions made to this project have been made under the OASIS Contributor License Agreement (CLA).

For information on whether any patents have been disclosed that may be essential to implementing this specification, and any offers of patent licensing terms, please refer to the Open Projects IPR Statements page.

This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published, and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this section are included on all such copies and derivative works. However, this document itself may not be modified in any way, including by removing the copyright notice or references to OASIS, except as needed for the purpose of developing any document or deliverable produced by an OASIS Open Project or OASIS Technical Committee (in which case the rules applicable to copyrights, as set forth in the OASIS IPR Policy, must be followed) or as required to translate it into languages other than English.

The limited permissions granted above are perpetual and will not be revoked by OASIS or its successors or assigns.

This document and the information contained herein is provided on an "AS IS" basis and OASIS DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY OWNERSHIP RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

OASIS requests that any OASIS Party or any other party that believes it has patent claims that would necessarily be infringed by implementations of this OASIS Project Specification or OASIS Standard, to notify the OASIS TC Administrator and provide an indication of its willingness to grant patent licenses to such patent claims in a manner consistent with the IPR Mode of the OASIS Technical Committee that produced this specification.

OASIS invites any party to contact the OASIS TC Administrator if it is aware of a claim of ownership of any patent claims that would necessarily be infringed by implementations of this specification by a patent holder that is not willing to provide a license to such patent claims in a manner consistent with the IPR Mode of the OASIS Open Project that produced this specification. OASIS may include such claims on its website, but disclaims any obligation to do so.

OASIS takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on OASIS' procedures with respect to rights in any document or deliverable produced by an OASIS Technical Committee can be found on the OASIS website. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this OASIS Open Project Specification or OASIS Standard, can be obtained from the OASIS TC Administrator. OASIS makes no representation that any information or list of intellectual property rights will at any time be complete, or that any claims in such list are, in fact, Essential Claims.

The name "OASIS" is a trademark of OASIS, the owner and developer of this specification, and should be used only to refer to the organization and its official outputs. OASIS welcomes reference to, and implementation and use of, specifications, while reserving the right to enforce its marks against misleading uses. Please see https://www.oasis-open.org/policies-guidelines/trademark for above guidance.


Table of Contents


1. Introduction

This section is non-normative.

Various tools handle the association and creation of related resources in conceptually similar ways, but often differ in details on how it is accomplished. The Linked Data Platform (LDP) already defines a model by which it is possible to relate resources to another, even if they are not RDF-based. This specification defines the method to create associated attachments to a given resource and understand if that resource supports the attaching of attachments.

As an example of how to create an attachment, simply HTTP POST the attachment content to the attachment container for the resource. The request should have a Content-Type header describing the attachment's media type. The optional Slug header is used to give the attachment a name.

Example 1
POST /bugs/2314/attachments HTTP/1.1
Slug: design
Content-Type: application/vnd.oasis.opendocument.text
Content-Length: 18124

[binary content]

The response contains a Link to the new attachment in the Location header. This server has also included a Link to the oslc:AttachmentDescriptor for the attachment in the HTTP response, which contains metadata about the attachment.

Example 2
HTTP/1.1 201 Created
Allow: GET,HEAD,OPTIONS,POST
Location: http://example.com/bugs/2314/attachments/3
Link: <http://example.com/bugs/2314/attachments/meta/3>; rel="describedby"; anchor="http://example.com/bugs/2314/attachments/3",
      <http://www.w3.org/ns/ldp#Resource>; rel="type"
Content-Length: 0

The following sections detail how to leverage LDP to accomplish the ways in which to discovery, get, create, update or delete attachments and associate with a web resource.

1.1 Terminology

Terminology uses and extends the terminology and capabilities of OSLC Core Overview, W3C Linked Data Platform [LDP], W3C's Architecture of the World Wide Web [WEBARCH], Hyper-text Transfer Protocol [HTTP11].

Attachment
A LDP-NR whose lifecycle is coupled with the attaching resource.
Attachment Container
A LDPC that contains Attachments for a resource.
Attachment Descriptor
A LDP-RS that contains additional data about an Attachment.

1.2 References

1.2.1 Normative references

[HTTP11]
R. Fielding, Ed.; J. Reschke, Ed.. Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing. IETF, June 2014. Proposed Standard. URL: https://httpwg.org/specs/rfc7230.html
[LDP]
Steve Speicher; John Arwe; Ashok Malhotra. Linked Data Platform 1.0. W3C, 26 February 2015. W3C Recommendation. URL: https://www.w3.org/TR/ldp/
[PURLMediaTypes]
N. Freed; M. Kucherawy; M. Baker; B. Hoehrmann. Media Types. IANA. URL: http://www.iana.org/assignments/media-types/media-types.xhtml
[RFC2119]
S. Bradner. Key words for use in RFCs to Indicate Requirement Levels. IETF, March 1997. Best Current Practice. URL: https://www.rfc-editor.org/rfc/rfc2119
[RFC2183]
R. Troost; S. Dorner; K. Moore, Ed.. Communicating Presentation Information in Internet Messages: The Content-Disposition Header Field. IETF, August 1997. Proposed Standard. URL: https://www.rfc-editor.org/rfc/rfc2183
[RFC5023]
J. Gregorio, Ed.; B. de hOra, Ed.. The Atom Publishing Protocol. IETF, October 2007. Proposed Standard. URL: https://www.rfc-editor.org/rfc/rfc5023
[RFC8174]
B. Leiba. Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words. IETF, May 2017. Best Current Practice. URL: https://www.rfc-editor.org/rfc/rfc8174
[RFC8288]
M. Nottingham. Web Linking. IETF, October 2017. Proposed Standard. URL: https://httpwg.org/specs/rfc8288.html
[turtle]
Eric Prud'hommeaux; Gavin Carothers. RDF 1.1 Turtle. W3C, 25 February 2014. W3C Recommendation. URL: https://www.w3.org/TR/turtle/

1.2.2 Informative references

[WEBARCH]
Ian Jacobs; Norman Walsh. Architecture of the World Wide Web, Volume One. W3C, 15 December 2004. W3C Recommendation. URL: https://www.w3.org/TR/webarch/

1.3 Typographical Conventions and Use of RFC Terms

As well as sections marked as non-normative, all authoring guidelines, diagrams, examples, and notes in this specification are non-normative. Everything else in this specification is normative.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this specification are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

The namespace for OSLC Core is http://open-services.net/ns/core#.

Sample resource representations are provided in text/turtle format [turtle].

Commonly used namespace prefixes:

    @prefix dcterms: <http://purl.org/dc/terms/>.
    @prefix ldp:     <http://www.w3.org/ns/ldp#>.
    @prefix oslc:    <http://open-services.net/ns/core#>.
    @prefix oslc_cm: <http://open-services.net/ns/cm#>.
    @prefix rdf:     <http://www.w3.org/1999/02/22-rdf-syntax-ns#>.
    @prefix wdrs:    <http://www.w3.org/2007/05/powder-s#> .
    @prefix xsd:     <http://www.w3.org/2001/XMLSchema#>.

2. Motivation

This section is non-normative.

Most users of lifecycle tools have the need to easily create attachments across a variety of integrated tools and associate them to some lifecycle resource in context to some scenario. Some specific scenarios where this touches cross tool integration:


3. Basic Concepts

This section is non-normative.

Attachments are added to a resource via a simple POST request to the appropriate LDP-Container resource. The entity body becomes the content of the attachment resource. The attachment may automatically be associated with the resource via some membership relationship, which may use the oslc:attachment membership predicate. Statements are also automatically added to the oslc:AttachmentDescriptor resource. The property values are assigned by the server or can be determined from standard headers of the POST. The following table maps the HTTP request headers from the POST request to create the attachment resource, to what can be used to derive the initial values in the indicated oslc:AttachmentDescriptor resource:

HTTP Request Header Prefixed Name
Slug dcterms:title
Content-Type dcterms:format
Content-Length oslc:attachmentSize

4. Working with Attachments

This section is non-normative.

The following examples illustrate how a client can work with attachments.

4.1 Find the Attachments for a Resource

Clients get the attachments for a resource by:

  1. Finding the attachment container for a resource using an HTTP OPTIONS method and Link header
  2. Getting the container for the list of attachments

Each resource that supports attachments has an attachment container, which is an LDP container. Clients discover the attachment container through an HTTP Link header. A client can use GET or HEAD to get the Link header, but OPTIONS is often more efficient because the server does not have to calculate the ETag or content length of the response. LDP resources must support HTTP OPTIONS, and responses to all HTTP requests for resources that support attachments must have the Link header.

Example 3
OPTIONS /bugs/2314 HTTP/1.1
Host: example.com

The response contains a Link to the attachment container with Link relation http://open-services.net/ns/core#AttachmentContainer. Note that other Link headers are in the response. In fact, LDP requires additional Link headers, which is why the response has a Link with relation type and target URI http://www.w3.org/ns/ldp#Resource.

Example 4
HTTP/1.1 200 OK
Allow: GET,HEAD,OPTIONS,PUT,DELETE
Link: <http://www.w3.org/ns/ldp#Resource>; rel="type",
      <http://example.com/bugs/2314/attachments>; rel="http://open-services.net/ns/core#AttachmentContainer"

Now the client requests the attachment container to see the attachments for this resource. It's a good practice to include an HTTP Prefer header to explicitly ask the server for the LDP containment triples.

Example 5
GET /bugs/2314/attachments HTTP/1.1
Host: example.com
Accept: text/turtle
Prefer: return=representation; include="http://www.w3.org/ns/ldp#PreferContainment"

The response is an LDP container for the attachments. It can be any LDP container such as an ldp:BasicContainer or an ldp:DirectContainer. This example uses an ldp:BasicContainer. The attachment container only contains attachments for a single resource.

Example 6
HTTP/1.1 200 OK
Allow: GET,HEAD,OPTIONS,POST
Content-Length: 323
Content-Type: text/turtle
ETag: W/"2773fef2237e91273bde782a43925458"
Link: <http://www.w3.org/ns/ldp#Resource>; rel="type",
      <http://www.w3.org/ns/ldp#Container>; rel="type",
Preference-Applied: return=representation
Vary: Accept,Prefer

@prefix oslc: <http://open-services.net/ns/core#> .
@prefix ldp:   <http://w3.org/ns/ldp#> .

<http://example.com/bugs/2314/attachments>
        a             oslc:AttachmentContainer , ldp:BasicContainer ;
        ldp:contains  <http://example.com/bugs/2314/attachments/2> , <http://example.com/bugs/2314/attachments/1> .

Clients can look at the ldp:contains property on the container for the attachments.

4.2 Get the Attachment Content

Once clients have the attachment URI, they can get the attachment by simply making an HTTP GET request to the attachment URI.

A Slug header can be included by a server in the response to a GET on an attachment resource. If a client wishes to store the content as a file, this value provides a hint as to the file name to use (subject, of course, to any file system restrictions). In the absence of an Slug header, the client may use the last segment of the resource's URI as a hint, or just choose an arbitrary file name.

Example 7
GET /bugs/2314/attachments/1 HTTP/1.1
Host: example.com

The response body is the attachment content. Servers should set the response Content-Type to describe the media type of the attachment. The response may have a Content-Disposition header with a filename parameter, although this isn't required. This example also contains a Link with relation describedby, which links to the oslc:AttachmentDescriptor for the attachment.

Example 8
HTTP/1.1 200 OK
Allow: GET,HEAD,OPTIONS,PUT,DELETE
Content-Disposition: attachment; filename="screenshot.png"
Content-Length: 53622
Content-Type: image/png
ETag: W/"678609cdee68e0fb8aea5f252b84a511"
Link: <http://example.com/bugs/2314/attachments/meta/1>; rel="describedby",
      <http://www.w3.org/ns/ldp#Resource>; rel="type",
      <http://www.w3.org/ns/ldp#NonRDFSource>; rel="type"

[binary content]

4.3 Create an Attachment

To create an attachment, POST the attachment content to the attachment container for the resource. The request should have a Content-Type header describing the attachment's media type and subtype as specified in Media Types. The optional Slug header is used to give the attachment a name. The Content-Length header is used to initialize the attachment size.

A client can set a Slug header in the attachment-creating POST to specify a hint for a name for the resource as part of that single request. This can be important as some systems require a name at the time the attachment is created. Different systems may have different requirements for valid attachment names, so the value of the Slug header should be interpreted as a hint in this context. If the given name can not be used as specified, it is transformed into a valid name. If that is not possible or the header is not specified, an arbitrary value is assigned. Failure due to an invalid name is undesirable because of the potentially large size of an attachment resource.

The client can provide the attachment size in the Content-Length header and this can be used to initialize the oslc:AttachmentDescriptor oslc:attachmentSize property. The server may compute a different attachment size than that provided by the client if the client specified value is incorrect or not provided.

Example 9
POST /bugs/2314/attachments HTTP/1.1
Slug: design
Content-Type: application/vnd.oasis.opendocument.text
Content-Length: 18124

[binary content]

The response contains a Link to the new attachment in the Location header. This server has also included a Link to the oslc:AttachmentDescriptor for the attachment in the HTTP response, which contains metadata about the attachment.

When a server successfully creates an attachment resource, it responds with an HTTP status code of 201 (created) with the URI of the newly created attachment resource in the HTTP response Location header. Additionally, if the server created an associated oslc:AttachmentDescriptor resource, the URI for this resource should be listed in the HTTP response Link header [RFC8288] with rel="describedby" [LDP].

Properties for the AttachmentDescriptor that are not readOnly, such as its title and description, can be updated using the usual HTTP PUT method.

Example 10
HTTP/1.1 201 Created
Allow: GET,HEAD,OPTIONS,POST
Location: http://example.com/bugs/2314/attachments/3
Link: <http://example.com/bugs/2314/attachments/meta/3>; rel="describedby"; anchor="http://example.com/bugs/2314/attachments/3",
      <http://www.w3.org/ns/ldp#Resource>; rel="type"
Content-Length: 0

4.4 Update an Attachment

To update an attachment, PUT the attachment content to the attachment resource.

Example 11
PUT /bugs/2314/attachments/3 HTTP/1.1
Content-Type: application/vnd.oasis.opendocument.text
Content-Length: 19377

[binary content]

The server typically responds with a 204 No Content status if the request succeeds. It also updates an associated attachment metadata in the oslc:AttachmentDescriptor in the describedby link. For example, the client could have included a Slug header on the update request in order to rename the attachment.

Example 12
HTTP/1.1 204 No Content
Link: <http://example.com/bugs/2314/attachments/meta/3>; rel="describedby"; anchor="http://example.com/bugs/2314/attachments/3",
      <http://www.w3.org/ns/ldp#Resource>; rel="type"
Content-Length: 0

4.5 Remove an Attachment

To remove an attachment, make a DELETE request on the attachment URI. This removes the attachment from the container and deletes the content and attachment metadata from the server.

Example 13
DELETE /bugs/2314/attachments/3 HTTP/1.1
Host: example.com

The server typically responds with 204 No Content status if the request was successful.

Example 14
HTTP/1.1 204 No Content
Content-Length: 0

4.6 Include Attachment Information Inline with a Resource

Servers can choose to include the attachment information directly in the HTTP response for a resource although this isn't required. Here is an example defect resource that contains attachments. The attachment container is an ldp:DirectContainer where the membership resource is the defect itself. The membership predicate is oslc:attachment, although this predicate is not required. The following example shows the results of an HTTP GET on http://example.com/bugs/2314.

Example 15
@prefix oslc:     <http://open-services.net/ns/core#> .
@prefix oslc_cm:  <http://open-services.net/ns/cm#> .
@prefix dcterms:  <http://purl.org/dc/terms/> .
@prefix ldp:      <http://w3.org/ns/ldp#> .
@prefix wdrs:  <http://www.w3.org/2007/05/powder-s#> .

<http://example.com/bugs/2314>
        a                   oslc_cm:Defect ;
        oslc:attachment     <http://example.com/bugs/2314/attachments/2> , <http://example.com/bugs/2314/attachments/1> ;
        dcterms:title       "A serious bug!" ;
        dcterms:identifier  "2314" .

<http://example.com/bugs/2314/attachments>
        a                       ldp:DirectContainer , oslc:AttachmentContainer ;
        ldp:contains            <http://example.com/bugs/2314/attachments/2> , <http://example.com/bugs/2314/attachments/1> ;
        ldp:hasMemberRelation   oslc:attachment ;
        ldp:membershipResource  <http://example.com/bugs/2314> .

<http://example.com/bugs/2314/attachments/1>
        wdrs:describedBy  <http://example.com/bugs/2314/attachments/meta/1> .

<http://example.com/bugs/2314/attachments/meta/1>
        a                       oslc:AttachmentDescriptor ;
        oslc:attachmentSize     "53622"^^<http://www.w3.org/2001/XMLSchema#integer> ;
        dcterms:created         "2011-07-18T13:22:30.45-05:00"^^<http://www.w3.org/2001/XMLSchema#dateTime> ;
        dcterms:creator         <http://example.com/users/steve> ;
        dcterms:format          <http://purl.org/NET/mediatypes/image/png> ;
        dcterms:identifier      "1" ;
        dcterms:title           "screenshot.png" .

<http://example.com/bugs/2314/attachments/2>
        wdrs:describedBy  <http://example.com/bugs/2314/attachments/meta/2> .

<http://example.com/bugs/2314/attachments/meta/2>
        a                       oslc:AttachmentDescriptor ;
        oslc:attachmentSize     "9196"^^<http://www.w3.org/2001/XMLSchema#int> ;
        dcterms:created         "2011-07-19T15:03:54.00-05:00"^^<http://www.w3.org/2001/XMLSchema#dateTime> ;
        dcterms:creator         <http://example.com/users/dave> ;
        dcterms:format          <http://purl.org/NET/mediatypes/text/x-diff> ;
        dcterms:identifier      "2" ;
        dcterms:title           "fix.patch" .

5. Implementation Conformance

5.1 General

Servers that support OSLC attachments MUST be Linked Data Platform 1.0 conformant servers [LDP]. [AT-1]

5.2 Resources with Attachments

Each resource that supports attachments MUST have at least one oslc:AttachmentContainer that holds attachments for that resource. [AT-2]

5.3 Attachments

An attachment MUST be a conformant Linked Data Platform Non-RDF Source (LDP-NR). [AT-4]

Successful responses to HTTP GET requests for an attachment URI SHOULD include a Content-Disposition header [RFC2183] with disposition type attachment and a filename parameter. The filename is often the Slug header value used to create the attachment with an appropriate file extension added for the attachment's media type. [AT-5]

If an attachment has an associated oslc:AttachmentDescriptor, responses to HTTP requests for the attachment URI MUST include a Link header [RFC8288] where the context URI is the attachment URI, the Link relation is describedby, and the target URI is the URI of the oslc:AttachmentDescriptor. [AT-6]

When servers update an attachment, they MUST also update any affected oslc:AttachmentDescriptor properties of the associated attachment descriptor. [AT-7]

When deleting attachments, servers MUST also delete any associated oslc:AttachmentDescriptor resources. [AT-8]

5.4 Attachment Containers

Each oslc:AttachmentContainer MUST be a conformant Linked Data Platform Container (LDPC). [AT-9]

Clients MAY use the HTTP Slug request header [RFC5023] to suggest a name when creating an attachment. If present, the Slug header SHOULD NOT include a file extension. [AT-10]

Servers SHOULD NOT reject an HTTP POST request to an oslc:AttachmentContainer solely because it does not contain a Slug header. [AT-11]

Servers SHOULD NOT reject an an HTTP POST request to an oslc:AttachmentContainer solely because they cannot use the Slug value unchanged. Servers SHOULD instead modify the Slug value as needed or assign a different name. [AT-12]

In response to a successful HTTP POST request that creates an attachment with an associated oslc:AttachmentDescriptor, the server MUST include an HTTP Link header in the response where the context URI is the newly-created attachment URI, the link relation is describedby, and the link target is the oslc:AttachmentDescriptor URI. [AT-13]

Clients MAY specify an LDP-NR interaction model when POSTing RDF content to an oslc:AttachmentContainer by including an HTTP Link header where the target URI is http://www.w3.org/ns/ldp#NonRDFSource and the link relation is type. In this case, Servers MUST honor the client's requested interaction model and treat the resource as an LDP-NR. [AT-14]

Servers MUST reject an HTTP DELETE request to an oslc:AttachmentContainer. [AT-15]

5.5 Attachment Descriptors

Servers MAY create an associated oslc:AttachmentDescriptor to describe properties of the attachment such as its name, media type, and size. [AT-16]

An oslc:AttachmentDescriptor MUST have an explicit rdf:type set to http://open-services.net/ns/core#AttachmentDescriptor in its RDF representations. It MAY have additional rdf:type values. [AT-17]

An oslc:AttachmentDescriptor MUST be a conforming Linked Data Platform RDF Source (LDPR). [AT-18]

The dcterms:title of the oslc:AttachmentDescriptor SHOULD be the value of the client-supplied HTTP Slug header. [AT-19]

Servers SHOULD use the Content-Type header value from an attachment creation request to determine the dcterms:format property value in the newly-created attachment's oslc:AttachmentDescriptor. The dcterms:format value SHOULD be a [PURLMediaTypes] media-type resource. [AT-20]

An oslc:AttachmentDescriptor MUST conform to the shape defined in 6.1 Resource: AttachmentDescriptor. [AT-21]


6. Resource Constraints

6.1 Resource: AttachmentDescriptor

This document applies the following constraints to the OSLCCoreVocab vocabulary terms.

An OSLC server providing the Attachments capability MUST implement the vocabulary defined in this section. [AT-22]

The oslc:AttachmentDescriptor resource type is used to describe the binary resource (or non-RDF Resource) associated with a particular resource. When a client POSTs an attachment content to a server, the server stores the attachment content and assigns a URI just like any other type of resource creation but it may also create an oslc:AttachmentDescriptor resource to contain data about the attachment.

There is no restriction on the content of each attachment resource. For example, it could be a photo of a kitten, an installation manual, a log file, or a source code patch. Since the attachment cannot be expected to contain additional client or server supplied data, a typical set of properties for each attachment is included with the oslc:AttachmentDescriptor resource itself. Thus, the object of each oslc:attachment statement is the binary attachment. Issuing an HTTP HEAD or GET operation on that binary attachment resource URL should produce an HTTP response with a header value of Link: rel='describedBy' to indicate the URL of the oslc:AttachmentDescriptor resource. The properties for the oslc:AttachmentDescriptor resource are indicated in the table below.

AttachmentDescriptor Properties
Prefixed Name Occurs Read-only Value-type Representation Range Description
dcterms:created Zero-or-one true dateTime N/A Unspecified Timestamp of attachment creation.
dcterms:creator Zero-or-many true AnyResource Either Unspecified Creator or creators of the attachment. Likely a foaf:Person, but not necessarily so.
dcterms:description Zero-or-one false XMLLiteral N/A Unspecified Descriptive text about the attachment.
dcterms:format Zero-or-one true unspecified Either Unspecified MIME type of the attachment content; SHOULD be a PURL media-type resource [AT-23].
dcterms:identifier Zero-or-one true string N/A Unspecified System-assigned identifier.
dcterms:title Zero-or-one false string N/A Unspecified Client-specified file name or title.
oslc:attachmentSize Zero-or-one true integer N/A Unspecified Size in bytes of the attachment content.

7. Conformance

Implementations of this specification need to satisfy the following conformance clauses.

Clause Number Requirement
AT-1 Servers that support OSLC attachments MUST be Linked Data Platform 1.0 conformant servers [LDP].
AT-2 Each resource that supports attachments MUST have at least one oslc:AttachmentContainer that holds attachments for that resource.
AT-3 Responses to HTTP requests for resources that support attachments MUST contain at least one Link header [RFC8288] where the context URI is the resource URI, the Link relation is http://open-services.net/ns/core#AttachmentContainer, and the target URI is the URI of an oslc:AttachmentContainer resource.
AT-4 An attachment MUST be a conformant Linked Data Platform Non-RDF Source (LDP-NR).
AT-5 Successful responses to HTTP GET requests for an attachment URI SHOULD include a Content-Disposition header [RFC2183] with disposition type attachment and a filename parameter. The filename is often the Slug header value used to create the attachment with an appropriate file extension added for the attachment's media type.
AT-6 If an attachment has an associated oslc:AttachmentDescriptor, responses to HTTP requests for the attachment URI MUST include a Link header [RFC8288] where the context URI is the attachment URI, the Link relation is describedby, and the target URI is the URI of the oslc:AttachmentDescriptor.
AT-7 When servers update an attachment, they MUST also update any affected oslc:AttachmentDescriptor properties of the associated attachment descriptor.
AT-8 When deleting attachments, servers MUST also delete any associated oslc:AttachmentDescriptor resources.
AT-9 Each oslc:AttachmentContainer MUST be a conformant Linked Data Platform Container (LDPC).
AT-10 Clients MAY use the HTTP Slug request header [RFC5023] to suggest a name when creating an attachment. If present, the Slug header SHOULD NOT include a file extension.
AT-11 Servers SHOULD NOT reject an HTTP POST request to an oslc:AttachmentContainer solely because it does not contain a Slug header.
AT-12 Servers SHOULD NOT reject an an HTTP POST request to an oslc:AttachmentContainer solely because they cannot use the Slug value unchanged. Servers SHOULD instead modify the Slug value as needed or assign a different name.
AT-13 In response to a successful HTTP POST request that creates an attachment with an associated oslc:AttachmentDescriptor, the server MUST include an HTTP Link header in the response where the context URI is the newly-created attachment URI, the link relation is describedby, and the link target is the oslc:AttachmentDescriptor URI.
AT-14 Clients MAY specify an LDP-NR interaction model when POSTing RDF content to an oslc:AttachmentContainer by including an HTTP Link header where the target URI is http://www.w3.org/ns/ldp#NonRDFSource and the link relation is type. In this case, Servers MUST honor the client's requested interaction model and treat the resource as an LDP-NR.
AT-15 Servers MUST reject an HTTP DELETE request to an oslc:AttachmentContainer.
AT-16 Servers MAY create an associated oslc:AttachmentDescriptor to describe properties of the attachment such as its name, media type, and size.
AT-17 An oslc:AttachmentDescriptor MUST have an explicit rdf:type set to http://open-services.net/ns/core#AttachmentDescriptor in its RDF representations. It MAY have additional rdf:type values.
AT-18 An oslc:AttachmentDescriptor MUST be a conforming Linked Data Platform RDF Source (LDPR).
AT-19 The dcterms:title of the oslc:AttachmentDescriptor SHOULD be the value of the client-supplied HTTP Slug header.
AT-20 Servers SHOULD use the Content-Type header value from an attachment creation request to determine the dcterms:format property value in the newly-created attachment's oslc:AttachmentDescriptor. The dcterms:format value SHOULD be a [PURLMediaTypes] media-type resource.
AT-21 An oslc:AttachmentDescriptor MUST conform to the shape defined in 6.1 Resource: AttachmentDescriptor.
AT-22 An OSLC server providing the Attachments capability MUST implement the vocabulary defined in this section.
AT-23 MIME type of the attachment content; SHOULD be a PURL media-type resource